Automatic Gates

AP525 single gate opener is suitable for a large range of gates. Manufactured in Australia, it is engineered to last a long life and carries a full 12 months Guarantee.

Powerful, quiet and efficien due to its innovative design and the pre wired internal control panel. Further more we supply you with an easy to understand installation manual written by installers. 

Automatic Gates Automatic Gates Automatic Gates
Simplicity, all in one Zinc plated laser cut steel internal body designed with powder coated steel cover housing the motor, gear box, battery and control panel. Strong, coated solid steel gears fitted with hard wearing bronze bushes guaranteeing durability of a life time. Strong thick and long connecting linkages that will pull or push large heavy gates and acts a bracing when the gate is shut.



Heavy duty articulated operator with Zinc plated laser cut steel internal body designed for standard mount or side mount (long side of the motor) with coated solid steel gears fitted with bronze bushes all housed in a Black powder coated steel housing.
Motor: New tech compact Heavy duty low consumption
Gate size: Can handle big gate up to 7 meters in width
Gate weight: Can handle heavy gates up to 400 kg
Opening In: Pulling to open can be up to130 degrees
Opening Out: Can be used on gates that opens to the outside (see diagram below)
Rising gates: Can handle rising gates
Limit switches: Fitted with easy to adjust limit switches that guarantees that the gate will always stop in the same place
Computerized control board: Internal control panel for ease of installation
Remote Controls, 2 x 4-button security rolling code 2 buttons reserved and 2 for usage with garage door or another gate.
Battery: Supplied with 12V DC BIG 7 AH battery
Auto Close: Setting for manual close using the remote control or Automatic close after a set time.
External Controllers: The system can be controlled by, Keypad, Push button, key switch, intercoms, electric sensors all can be used to control the opening and closing.


Automatic GatesPower : Mains power to the control panel that is converted to 12v Dc to run the system
Rated load max 300 N (approx 30 kg force) at right angles to the end of the primary arm
Stand-by power consumption max 0.5 W
Operating power consumption max 50 W per motor
Gate length max 7 m per leaf
Gate weight max 400 kg per leaf
Operating time 10 – 15 seconds (increases with load)
Opening angle (standard) max 110 degrees
Opening angle (with side mount kit) max 130 degrees

Package Contents

Automatioc Gates contents

-1 Powerful DC motors
-Pre-wired built-in control panel
-2 Remote controls 
-Battery 12v (7AH)
-Ball bushes..etc
-Installation instructions